Product Details

35KV数字高压无线核相仪注意事项及保养：

1. Install antenna before frequency transmission calibration. The polycarbonate housing must be kept clean — wipe off dirt and moisture. After each use, wipe the instrument with a cloth dipped in silicone oil.

2. Store the instrument properly in its case when not in use.

3. In low temperatures (-10°C or below), store the instrument in a warm place as batteries may fail in cold conditions.

4. Test the instrument before each use.

35KV数字高压无线核相仪Technical Features:

1、屏幕显示Content：无线高压核相仪，不同相、同相、频率、X、Y、 、 、。

2、电源：主机采用可充电电源，X 和 Y 采集器 5 节 AG13 电池。

3、自动关机：开机后8分钟左右主机自动关机

4、接触被测强电场时，仪器会自动报警。

Technical Specifications:

1. In-Phase Determination: ≤15° is in-phase

2. Accuracy: Self-calibration ≤2°; Field: In-phase ≤8°, Out-of-phase ≤13°

3. Sampling Rate: 3 times/second

4. Main Unit Power: 9V±2V

5. X & Y Collector Voltage: 12V±3V

6. Host Operating Current ≤7mA

7. X & Y Collector Current: ≤5mA

8. Host to X & Y Collector Line-of-Sight Distance: X≥150m, Y≥150m

9、工作环境： -35℃┉ 50℃ 湿度：≤95%RH

10、储存环境：-40℃┉ 55℃ 湿度：≤95%RH

11. Measurable AC Voltage Range: 0.38kV~500kV